Posts Tagged ‘bodybuilding’

BODYBUILDING SECRETS REVEALED #7  Six secrets of  the champions

 Edited by STEVEN MILNER IIST VTCT

STEVEN MILNER IIST VTCT


Six Muscle Building Secrets From The World’s Best Bodybuilders!
By: Daniel Przyojski Oct 11, 2006

The difference between having a well developed physique or looking like a guy that ‘works out once in a while’ is in your applied training knowledge. Here are 6 training secrets from the best. Apply these and see if they work for you!

In my earliest days of being an aspiring bodybuilder, I trained too often and too hard. Believe you me; I trained harder than most top bodybuilding stars. I’m not saying this to brag about myself; in fact it’s quite the opposite. I’m saying this to point out how ignorant I was when it came to applying real life training methods that actually build muscle and not just tear it down. The difference between having a muscular, well developed physique or looking like a guy that “works out once in a while” is in your applied training knowledge. At first I reasoned that going to the gym 5 or 6 times a week was a sure path to building an outstanding physique. After a few fruitless years of weight training at the University of Futile Methods, I discovered 6 powerful muscle building secrets from the WORLD’S BEST BODYBUILDERS. Once I applied this scientifically sound training knowledge to my bodybuilding lifestyle, in 12 month’s time I built more muscle size and strength than in the previous 3 years.

Check and see how many of these 6 secrets you’re applying to your bodybuilding lifestyle!

Secret #1: Stimulate The Muscle Don’t Annihilate It!
This has to be the granddaddy secret of them all. If I had just a dime for every person who gave up weight training because of over training, I would quite possibly be the richest man in the world. I learned this secret from Mr Olympia Ronnie Coleman. Here was one of the best bodybuilders that ever lived, and I was doing more sets and reps in my weight training than he was. Ronnie Coleman believes that you should strive to, “Stimulate the muscle, don’t annihilate it.” Once a muscle has been thoroughly stimulated, more sets and reps will just retard growth. Great bodybuilders like Ronnie Coleman limit the number of sets and reps per workout, this makes it easier to target your specified muscle and enhance its overall potential. Too many bodybuilders are guilty of “over training.” Most weight lifters just go into the gym and do countless exercises per muscle group and never give a thought to the whatifs or whyfors of the training regime they’ve adopted. It’s that type of approach to training that leads to insignificant gains in muscle mass and overall fitness. To stimulate muscle growth pick 1 or 2 basic exercises per muscle group and perform 4 to 6 all out hard work sets for each exercise. Rep range should be between 6 to 20 reps with all the weight you can safely handle.

Secret #2: Heavy Basic Exercises Build Big Muscles!
Countless sets of concentrated dumbbell curls, preacher curls, cable curls and incline dumbbell curls will not produce half the results that a 6 set weight pyramid of all-out 6 to 20 reps Olympic barbell standing curls will.  My training partner and I were guilty of this crime. The same can be said for the Squat. All out barbell back squats for 6 to 20 reps will produce more muscular size and strength than 50 sets of leg extensions, leg curls, and even leg presses. I learned this important secret from Lee Priest; a man whose training methods of using heavy squats will put slabs of muscle on the most hopelessly skinny guys you have ever seen. Champion bodybuilder Jay Cutler is also a big advocate of big weights with basic exercises. The biggest, strongest, and best-built champions of both past and present always incorporate the squat, deadlift, bench press, shoulder press and bent over rows into their training. You cannot build mighty muscles lifting mini mouse weights. End of story!

Secret #3: Eat Like A Bodybuilder To Look Like A Bodybuilder.
This sounds simple and actually is simple, yet most trainees screw it up

1. Protein. The most important element to the bodybuilder. Protein is for growth, maintenance and repair of muscle tissue. One to one and a half grams of protein per pound of bodyweight is recommended. The highest quality proteins are from animal sources i.e. eggs, fish, poultry, and meat and dairy products.
2. Carbohydrates. Raise the blood sugar level and supply the muscles with energy. Best sources of carbohydrates are potatoes, oatmeal, stone ground whole wheat bread and cereals. You should also consume several servings of vegetables every day.
3. Fats. Fats are essential to a good diet as they heat the body and lubricate body parts. They also provide a necessary base for carrying vitamins A, D and E. You can get ample amounts of good fats through your daily diet of fish, eggs, and if needed a tablespoon of olive oil. If you’re trying to build new muscle and keep your body fat at 10 percent or less, you’ll wind up looking like a well defined scarecrow. As Gunter Schlierkamp says, “Eat big and grow big!”

Secret #4: 7 To 9 Hours Of Sleep At Night.
You cannot and will not grow bigger and stronger if you ignore this rule. 7 to 9 hours of sleep is required for the total recuperation and growth of the entire body. Muscular bodybuilders like Chris Cormier and Markus Ruhl are big believers in proper rest. Rest time is when the combination of proper training and eating come together and morph into making bigger, stronger muscles. When you’re at the gym heaving the weights around, you’re actually tearing down the muscle tissue not building it up. When you’re eating the proper amounts of protein, carbohydrates, fats, and water, you’re feeding the muscles for growth. But when you’re sleeping the actual growth is taking place. Get your rhythm down, improve your sleeping habits! The average, healthy individual needs to live on a 25 hour cycle, but of course our planet is on a 24 hour cycle. So instead of switching planets, let’s look at what you can do to better understand this.    The body is at rest and can do what it’s meant to do at sleep time, GROW. Power naps throughout the day (15 to 45 minutes of sleep) are also a great way to build up extra energy and give the muscles time to repair and grow. Just remember this, cut your sleep short and you’re cutting your progress short! You have to decide what you want most, late nights out partying with friends or a bodybuilder’s physique that turns heads wherever you go!

Secret #5: Have A Master Plan.
This secret could arguably be the number one ingredient needed to be successful. I learned this secret from the all time bodybuilding great Arnold Schwarzenegger and have never forgotten it. What are our goals and why are we training? Without a master plan you’ll be like a ship at sea with no defined destination and without a rudder to steer yourself. Here is what a master plan consists of. First off, what’s your goal?

1. End Goal. What do you want to be or accomplish? Do you want to win a state or national bodybuilding championship? If so then that is your end goal.
2. Goal Map. This is where you plan out the ways and means of accomplishing your goal and how long it will take you to achieve it. How will you cycle your training, how will you cycle your diet, what supplements will you take, what will you have to give up in order to realize your dream?
3. Take Action. Now this is really the hardest part, taking action and sticking to your plan. You must stay the course until you reach your desired outcome. Neither Arnold nor any other champion bodybuilder would have been successful if they abandoned their master plan after their first setback or failure.

Secret #6: A Winner Never Quits And A Quitter Never Wins!
Remember this very simple phrase and make it a part of your life. When Gunter Schlierkamp defeated Ronnie Coleman some people said he just got lucky. A lucky break or successful event in life is nothing more than being physically and mentally prepared to take advantage of an opportunity when it comes your way. Think and act like a champion and you’ll be one!

Power Health Always,
Dan Przyojski
Email: dan@powerhealthproducts.com

BODYBUILDING SECRETS REVEALED #7  Six secrets of  the champions Edited by STEVEN MILNER IIST VTCT

THE SCHWARZENEGGER SECRETS Part 1

Why Was Arnold’s Physique So Far Ahead Of Its Time?

By STEVEN MILNER IIST VTCT

Arnold was able to get huge back in the day because of the tactics he used while training, learn how he used cheat curls and other techniques to get huge arms.

Reading about the workouts Arnold did back in the ’60s and ’70s is inspiring, but did you know there are loads of hidden secrets in those past routines that most bodybuilders just don’t get? The specific muscle training tactics he used, either by instinct or by design, are the very reasons Arnold was the biggest bodybuilder of his era and why his physique in its prime is still outlandish even by today’s freaky standards. For the most part he was instinctively doing a lot of little things precisely right, and though they may seem small those details paid off big. (Some say he was even splitting muscle fibres, which is entirely possible, but tremendously rare.) For example, he knew how to overload the muscle at the exact spot where maximum force* can occur, the point along the stroke where muscle fibres are perfectly aligned for extreme fibre activation. It’s one of the reasons his arms were spectacularly big, full and peaked, and you should follow his lead to make your arms and other muscles more massive. No other bodybuilder in the history of the sport has made the same impact. Indeed, Arnold Schwarzenegger remains the greatest, and most influential, bodybuilder of all time in the eyes of many.

Cheat Curls
If you’ve read anything about his biceps training, you know that cheat curls were one of his favorite size builders. No, he didn’t invent them, but he sure made them popular. He used to start his biceps program with them, heaving up massive poundage’s.
Arnold made cheat curls popular but a lot of people criticised him, saying he wasn’t training biceps, only his lower back, but his biceps had high peaks that made his arms look unbelievably big. Now, you could contend that those who dismissed his cheat curls as non-productive had a point. After all, Arnold did a lot of other biceps exercises too, so cheat curls may really have been training more of his lower back than his arms but I don’t think so. I’ve an idea those cheat curls may be one of the key reasons his biceps got so incredibly full and peaked. Why?

Max-Force Generation Point
The max-force* generation point I mentioned earlier is the place on an exercise’s stroke at which the target muscle can generate the most force, and more force equals more mass. That point, say many scientists, is the spot where the most muscle fibres are stressed to the max because they are perfectly aligned for action. So if you overload that max-force point correctly, max growth stimulation can occur.

Where is that sweet spot on the curl’s stroke?
Right below the point at which your elbows are bent at 90 degrees, between the bottom and the midpoint. There has to be some stretch in the muscle for ideal fibre alignment and therefore max-force production; in fact the closer you get to full contraction, the less force you can produce because of fibre crowding and bunching. Remember what I said in an earlier post about sarcomeres being similar to six man rowing boats all rowing into and over each other.

Now imagine Arnold doing a cheat curl. He would lean forward, bend his arms slightly and heave the heavy barbell to his shoulders. Almost the entire overload occurred right at the max-force point-between the arms-straight-position and the midpoint. One of Arnold’s favourite bicep exercises was cheat curls. It overloads the biceps right at the max-force point, just below where the elbows are bent at 90 degrees.In fact, there was hardly any resistance on his biceps any place else along the stroke. Interesting. Semi-stretched position overload. Perhaps that’s why Arnold’s biceps were so high and he swore by cheat curls as his biceps mass exercise.

Isn’t cheating dangerous?
Absolutely, more people probably get injured doing cheats than those that go on to develop big biceps from them, but remember “where theres a will, and there is a fcking will, theres a way, and there is a fcking way” (Sexy Beast). Soz, couldn’t help myself.  Instead of doing barbell cheat curls, try cable curls. Maintain strict form throughout the set. Begin by first doing as many strict reps as you can, aim for 10 reps. When you can’t do another full rep, pull the bar up to the max-force spot, right below the midpoint, and do short partials till you can’t stand the burn. Those partial cheat reps will overload the muscle through this short range of motion without risking your lower back, well, within reason anyway.

Why use a cable instead of a barbell?
Because cables produce more uniform resistance, without the heaving at the bottom starting point of the exercise you get with a barbell. Try partial reps at the end of a set of barbell curls and you’ll see what I mean.

Main Muscle Worked: Biceps.   Equipment: Cable.   Mechanics. Type: Isolation.

What about Stretch Position Overload?
The max-force overload “cheats” weren’t all there was to putting the peaks on Arnold’s arms. While cheat curls attacked the semi-stretched point, he also favoured stretch-position overload. For biceps that meant incline curls. By reclining on a 45-degree incline bench with a dumbbell in each hand hanging down on either side of him, at the start of the curl his biceps were in an extreme stretch range. He would fire out piston-like reps, keeping tension on his biceps throughout the stroke and blasting out of the fully stretched position-but without heaving or jerking.

Fibre Splitting
It’s interesting to note that recent studies have linked stretch overload to hyperplasia, or fibre splitting. One animal study triggered a 300 percent increase in one muscle that was subjected to stretch overload in only 30 days. Yes, that’s tripling the size of the muscle, and the researchers suggest that a lot of the massive increase was caused by fibre splitting, as evidenced by muscle biopsies.

Arnold’s Secret Workouts?
Could stretched-position overload along with max-force-point “cheats” be Arnold’s secret weapons for incredible biceps mass? Well it worked for him, but it wasn’t only his biceps that got freaky from stretch overload.

Arnolds Chest Workouts.
Another example of Arnold using stretch overload is his chest workout. One of his favourite pec movements was dumbbell flyes, but he had a certain way of doing them-only moving through the bottom third of the stroke. He lowered to the bottom stretched position, but on the upward stroke he stopped the dumbbells when they were about three feet apart, immediately lowering back to the stretch. Why?

Dumbbell Flyes.
He said the short stroke kept tension on his pecs, which is true and important, but it also placed the most overload on his pecs when they were elongated, or stretched. Those partial flyes were really just rapid-fire cheat reps in a stretch-position pec exercise-and no doubt one of the big reasons Arnold’s pecs were so full and striated.

Calves.
Arnold was a master at getting the most growth activation from every set, and calves are another example. When he moved to the America, his calves were underdeveloped compared to most of his other muscle groups, this was before he met and talked to Reg Park, a former Mr. Universe winner and a man who was a big believer in overload.  Arnold was using a few hundred pounds on his various calf raises, but when he trained with Reg, he was amazed to see his mentor pile 1,000 pounds on the calf machine and keep grinding out movement until he could barely budge the gigantic load. Arnold soaked up that experience and information and immediately began applying it. Soon he was using 1,000 pounds on his calf raises, and two or three guys on his back for donkey calf raises, a better stretch-position calf exercise than standing calf raises. But don’t think for a minute that he stopped a set when he couldn’t get all the way to the very top.

Never Waste A Set.
When he couldn’t do anymore full reps, he would drive the weight up as high as he could, usually just barely above the bottom stretch point, and do partials till the muscle couldn’t even twitch. It burned like crazy, but it worked. Soon his calves were one of his best body parts, in fact they were so good that he was accused of having calf implants. I think he instinctively knew how to train in semi-stretched and stretched positions. If you’re neglecting stretch overload in the gym, it may be one of the biggest reasons you’re not building more muscle faster. Arnold achieved semi-stretched and stretched position overload at almost every workout, and you might want to follow his lead.

I’ve found that overloading a muscle in its semi-stretched point with cheat reps and power partials similar to what Arnold used at the end of his calf raises and other exercises can make each set two to four times more effective at building mass. Cheat reps work so well because after you hit failure, you keep firing the muscle at its max-force-generation point, which according to scientists is the key mass building position.  Arnold also instinctively knew to train every muscle in the fully stretched position for the fullest, most complete development possible. Was he triggering hyperplasia, or fibre splitting? It’s quite possible. Whichever way you look at it, Arnold knew what he was doing and achieved freaky mass, even by today’s standards.

Edited from an article originally featured on Muscle and Fitness http://www.muscleandfitness.com/training/arms

SIX WEEKS TO A BIGGER CHEST

(I would recommend waiting till you’re an intermediate or veteran before using pyramid sets because the stress to your system can be challenging and overtraining can become a real issue. STEVEN MILNER IIST VTCT Qualified)

Grow your chest in six weeks with little more than heavy weight and basic tools
By Jim Ryno

When your goal is to build bigger pecs as soon as possible, getting creative with exercise selection is not only unnecessary, but in most cases counterproductive. Machines certainly have their place in a hypertrophy routine, but anyone who tells you he got a big chest by doing only the pec deck is either lying or selling a pec deck. Adding size requires focusing on the most basic lifting equipment in the gym: barbells, dumbbells and benches.

The following six-week chest-building routine has you training the pecs twice a week and hitting the muscles from top to bottom with incline, flat-bench and decline exercises – four of them free weight pressing moves and one cable flye thrown in as a burnout finisher. The reps top out at 10 to encourage heavier weights and promote hypertrophy, and volume bumps up to 16 sets per workout in weeks 4-6 to maximize mass. Nothing fancy, nothing cute. Just simple and effective.

CHEST BUILDING ROUTINE
Perform twice a week with 2-3 days between chest workouts.

Weeks 1-3
EXERCISE

Bench Press; 3 sets, 10, 8, 6 reps.
Incline Barbell Press; 3 sets, 10, 8, 6 reps.
Dumbbell Decline Press; 3 sets, 10, 8, 6 reps.
Decline Barbell Press; 3 sets, 10, 8, 6 reps.

Weeks 4-6
EXERCISE

Dumbbell Decline Press; 3 sets, 10, 8, 6 reps.
Bench Press; 4 sets, 10, 8, 6, 6 reps.
Incline Barbell Press; 3 sets, 10, 8, 6 reps.
Decline Barbell Press; 3 sets, 10, 8, 6 reps.
Incline Cable Flye; 3 sets, 10, 10, 10 reps.

Power of the Pyramid
Perform all pressing exercises with a pyramiding rep scheme. On your first working set, choose a weight that allows you to reach 10 reps, then increase weight on each successive set so that you can only do eight reps on your second set and six reps on your third (and fourth, where applicable).

This article appears on the Muscle and Fitness site

arnie shouldersTHE SPECIFICS OF SHOULDER TRAINING

By Steven Milner

All progressive resistance exercises for the shoulders involve lifting the arm. But although the result is a lifting of the arm, the actual action involved is rotation of the shoulder joint. With few exceptions, all movements are the result of the rotary movements of one or more joints. When you know which joints are involved and what they are doing, you will be able to understand the mechanics of individual exercises and how to do them correctly. The shoulder joint is the most mobile and most vulnerable joint in the body, being able to rotate the arm through a full 360 degrees. The movement of the shoulder is controlled by the deltoids, of which there are three, the front or anterior, side or lateral and rear or posterior deltoids or delts. These muscles, working individually and in combination, have one basic function: they abduct the arm away from the body.

There are two basic types of shoulder exercises; presses, where the arms are lifted using a combination of the shoulder and elbow joint, and raises where the arms are raised up and away from the body in front, behind or sides using only the motion of the shoulder joint itself.
Presses are compound exercises, since they use more than one joint and muscle. You can move more weight with presses because you have a leverage advantage and more muscle is involved, so presses have the edge when it comes to building maximum mass and strength.
Raises, or laterals, are isolation exercises as they involve only the shoulder joint and no other muscles than the deltoids. Laterals are excellent for working and shaping the individual heads of the deltoids and can be done, more or less to the front, side and rear to stress specific areas of the shoulder muscles.

I’ll talk you through some of the different shoulder exercises and offer some suggestions as to how to get the best from them. Of course this article only covers the basics, there are many variations. Remember though, no matter what the movement, focus on what the shoulder joint is doing, feel the muscles working and keep the exercises strict to encourage growth and limit the risk of injury. It takes time and skill to isolate the deltoids as a group and special attention to target individual deltoid heads.

PRESSES
Presses can be done using a barbell, dumbbells or with various types of machines and cables. In all cases, you begin by holding the weight at about shoulder height, palms facing forward, elbows underneath for support. The exercise is performed by lifting straight up overhead, pausing at the top, then lowering the weight back, under control, to the starting position.

Doing presses with a barbell or machine, your hands are locked into place. This tends to somewhat limit the amount of rotation of the shoulder joint compared to pressing with dumbbells. Depending on the equipment involved, you can position your hands further apart or closer together to hit the shoulders from a variety of angles. In general, the closer together your hands are placed the more involvement there is from the triceps; the further apart your hands, the less triceps are involved.

Another way of looking at this is by thinking in terms of the elbow joint. The longer the range of motion of the elbow the more it bends and straightens the more the triceps become part of the exercise. When the elbows are less involved, so are the triceps less involved. As above, so below.

BARBELL PRESSES
Barbell presses can be done to the front, as in the military press or with the bar behind the neck for presses behind the neck, oddly enough.

Military Press: From a standing position, clean the weight (lifting it with a reverse curl movement) or take the bar off a rack holding it with a palms forward grip and hold it across the upper chest. Press the bar upward, locking out the elbows on top, and then lower the weight, under control, back to the starting position, watch your face!

Press Behind the Neck: Position the bar across the back of the neck, holding it palms forward. Press the bar upward, locking out the elbows on top, and then lower the weight under control back to the starting position. This can be performed either seated or standing Don’t rest or drop the weight on your neck it’s just stupid.

DUMBBELL PRESSES
Dumbbell presses can be done standing, seated on a flat bench or on a bench that gives you back support.

Clean the dumbbells, or have a training partner pass them to you, and hold them at shoulder height about level with your ears just outside of your shoulders on each side, palms facing forward. The most common way to do this exercise is to press the weights straight up overhead without locking out the elbows, and then lower the dumbbells under control back to the starting position.

There is a twist on this movement, bear in mind that the action of the shoulders is rotation. Hold a pair of dumbbells level with your ears just outside your shoulders and then press them up in an arc over your head, before the dumbbells come together at the top rotate your wrists so that your palms are facing, then bring them down in a similar arc to the starting position. Using dumbbells rather than a barbell means your hands are not locked into position, and lifting them in an arc, similar to dumbbell flyes for chest, allows for extending the range of motion of the exercise.

Shoulder press bottomshoulder mid pressshoulder press top

MACHINE PRESSES
It doesn’t matter what type of machine you use, the basic action of pressing against resistance overhead recruits the delts and extends the triceps during the range of movement. Concentrating on how much rotation you’re getting from the shoulder joint during the movement and how much the elbow is involved will give you a good idea of exactly what kind of movement the machine is allowing you to do. Remember, in most cases machines don’t allow for building as much mass and strength but often allow you to do a stricter movement and in some cases work through a longer range of motion. One negative aspect of machine presses is that they don’t allow for strengthening all the support tissue around the joint to the degree that is possible with free weights.

LATERALS
Laterals involve lifting the arms up and out to the side with the arms kept more-or-less straight so that there is no involvement als can be performed using dumbbells, cables and various kinds of machines.

side lateral shoulder raisesSide Laterals: Stand holding a dumbbell in each hand hanging down by your side, palms facing inward. Lift your arms out to each side, elboof the elbow joint or the triceps. You can do laterals to the front, side or rear although each of the techniques involved varies with the delt head being targeted. Laterws slightly bent, until the weights are level with the top of your head. Pause at the top, and then lower the weights under control back to the starting position.

You’ll see bodybuilders starting with the weights held together in front of them, using fairly heavy dumbbells and then swinging the weights up to either side so that momentum helps with the lift. This kind of cheating can be useful for advanced bodybuilders, but it can easily get out of hand and diminish rather than increase intensity. So be wary of using this technique.

Front Laterals: Stand with a dumbbell in each hand, hanging down at arm’s length in front of you, palms facing your thighs. Lift one arm forward and up and bring it toward the middle, palm remaining downward, bringing the weight up toward the middle helps isolate the front deltoid, but opinions vary. Raise the dumbbell so that its directly in front of you and slightly higher than the top of your head, pause for a moment at the top, then lower it under control back to the starting position. Repeat using the other dumbbell. This movement is usually done by alternating arms but can also be done lifting both dumbbells or a bar at the same time.

Rear Laterals: Bend over at the waist with a dumbbell in each hand at arms length below you, palms facing inward. Keeping your body steady, lift the dumbbells out and up to both sides and slightly forward so that the weights end up beside your ears rather than back even with your shoulders. This keeps the focus on the rear delts and away from the side delts. Pronate the weights by rotating your thumbs down slightly. Lift as high as you can, pause at the top, then lower the weights under control back to the starting position.

Cable Laterals: The three basic types of laterals can be done using a cable and handle attached to a low pulley and in some cases two such cables and handles.

Cable Side Lateral Raises: This can be done to the side with the pulley beside you and the lift going straight up or with the cable on the other side with the cable crossing over in front of your body as you do the lift.
Cable Front Laterals Raises: Perform the lateral raises to the front with the pulley located behind you. You can use individual handles for this movement or both hands together holding a short bar.
Cable Rear Lateral Raises: Lean down and grasp a “D” handle with the pulley  on the opposite side of the arm you’re using and pull away and up from the low pulley station, much as you would with dumbbells or you can use two pulleys, one on either side in a crossover fashion doing both arms at once.

UPRIGHT ROWS
Upright rows involve lifting a barbell or handle attached to a low pulley cable up in front of you to hit the front deltoids. Stand holding the bar with an overhand grip arms length down in front of you, hands about shoulder width apart. Lift the bar up leading with your elbows, pass the bar close to your body, pause the bar for a moment at a position just below your chin, then lower the bar under control to the starting position.

MACHINE LATERALS
There are a variety of machines that allow you to do side lateral exercises and a few with which you can target the rear delts. The basic movements have to be the same, no matter the equipment used, if the target muscles are going to be trained. Read the instructions posted on individual machines for more information or ask a gym employee. Have you heard me say that a personal trainer is worth his or her weight in gold and a committed training partner is a diamond? Well they come in really handy when you’re doing shoulders believe you me.